White Industries Freehub Body

We’re going to assume that you’ve landed on this page because you want to either swap your freehub body for a different style or simply replace it with the same one, so it’s important that you read all the information below to help ensure you choose the proper freehub body for your hub. You can also refer to the “Freehub Body Identification Guide” in the link at the bottom to see more pictures and details on each freehub body.

Features

• Made from 6/4 titanium
• Compatible with either 24T or 48T engagement systems
• Freehub bodies come with:
  • 2 bearings installed
  • 3 pawl springs
  • Pawls not included
    • Use your old pawls unless damaged
• 1.8mm cassette spacer included on XD/XDR drivers only
  • Spacers available separately for Shimano HG 11 and HG 10
• Not compatible with other brands of hubs

Specs for freehub bodies

• Shimano/SRAM 11 speed HG
  • If you are swapping from a Shimano Micro Spline driver, you will need to purchase the correct axle kit for the new driver (see Hub Parts>Axle Kits)
  • Fits Shimano/SRAM 8/9/10/11 speed HG cassettes
  • Fits new Shimano road 12 speed Hyperglide+ Ultegra and Dura-Ace cassettes
  • Fits SRAM Eagle 12 speed PG-1230 cassette
  • Purchase a 1.8mm cassette spacer for use with 8/9/10 and 11 speed mountain cassettes
    • 11 speed Shimano road cassettes do not need a spacer (except Ultegra HG-800 11/34)
  • Bearings: 1x 6902 and 1x 3802W
• SRAM XD/XDR
  • If you are swapping from a Shimano Micro Spline driver, you will need to purchase the correct axle kit for the new driver (see Hub Parts>Axle Kits)
  • Fits SRAM XD mountain and XDR road cassettes
  • Comes with 1.8mm spacer for use with XD mountain cassettes
  • Bearings: 2x 3802W
• Shimano Micro Spline
  • Fits Shimano Micro Spline cassettes
  • If you are simply replacing a Micro Spline freehub body, you already have the correct axle
  • Bearings: 2x 3802W
• Campy 11 speed
  • If you are swapping from a Shimano Micro Spline driver, you will need to purchase the correct axle kit for the new driver (see Hub Parts>Axle Kits)
  • Fits 9/10/11/12 speed Campy cassettes
  • Bearings: 2x 3802W
• Campy N3W/EKAR 13 speed
  • If you are swapping from a Shimano Micro Spline driver, you will need to purchase the correct axle kit for the new driver (see Hub Parts>Axle Kits)
  • For use with CLD hubs only
  • Fits Campy N3W/EKAR 13 speed cassettes
  • Will fit Campy 10/11/12 speed cassettes with Campy adapter/part #AC21-N3W
  • Bearings: 2x 3802W
  • Comes with a 2.5mm spacer that goes between the drive side axle end and the outer bearing of the driver

Freehub body and hub compatibility